RagnarTech, Inc. engineers and manufactures innovative and practical equipment designed to improve the use of mobile cranes. This equipment is specially designed to enhance mobile cranes for the tree care, construction and demolition industries.
| Cutting Capacity | 24” |
| Motor | 38HP Kohler |
| Suggested Crane Size | 60+ ton |
| Pump | Parker pressure and flow compensated pump |
| Controller | Iqan control, Scanreco remote control |
| Grappler Assembly | Hultdin grappler and Hultdin super saw 550. Indexator rotator. Electric motor pump backup, counter balance safety valves for all cylinders, highest quality steel and components |
| Unit Weight | 5,000 lbs |
| Paint | Electro static rust prevention and Polyurethane paint |
| Cutting Capacity | 36” |
| Motor | CAT 2.2 T4 Final Diesel Engine with 60HP |
| Suggested Crane Size | 80+ ton |
| Pump | Parker pressure and flow compensated pump |
| Controller | Iqan control, Scanreco remote control |
| Grappler Assembly | Hultdins MG 20‐R/XR grapple and 550 SuperSaw 113 cm bar. Indexator rotator. Electric motor pump backup, counterbalance safety valves for all cylinders, highest quality steel and components |
| Unit Weight | 7,200 lbs |
| Paint | Electro static rust prevention and Polyurethane paint |
| Unit Weight | 800lbs |
| Rated Weights | Up to 2500lbs |
| Capacity | 10-ton |
| Container Size | 12' 10" X 8' 6" x 4' (3m x 2.5m x 1m) |
| Capacity | 12 cubic yards and rated up to 8 tons of bulk materials. |
| Rotation | 360-Degree Rotation |
| Hydraulics | Remote Controlled Hydraulic with "Bombay" dump doors |
| Engine | Powered by 130 hp CAT Diesel Engine |
| Controller | Controlled by radio remote |
| Weight | 308 lbs |
| Cutting diameter | 4-10 in |
| Working pressure | 2,900-4,351 psi |
| Minimum oil flow | 7.9 gal/min |
| Opening | 23.6 in |
| Impact plate height | 12 in |
| Weight | 595 lbs |
| Cutting diameter | 10 in |
| Working pressure | 3,625-4,351 psi |
| Minimum oil flow | 15.8 gal/min |
| Opening | 27.1 in |
| Impact plate height | 15.3 in |
| Weight | 1,256 lbs |
| Cutting diameter | 12 in |
| Working pressure | 3,625-4,351 psi |
| Minimum oil flow | 15.8 gal/min |
| Opening | 33 in |
| Impact plate height | 19.8 in |
| Weight | 4,300 lbs |
| Shear cutting capacity | 16 in |
| Grapple opening | 50 in |
| Excavator Mass | 21-35 tons |
| Operating pressure | 3600-4500 psi |
| Operating oil flow | 50-60 gpm |